Model Information - GE D30 Instruction Manual

6.5 PRODUCT INFORMATION
6.5PRODUCT INFORMATION
PATH: ACTUAL VALUES
 MODEL INFORMATION

The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.
ETHERNET MAC ADDRESS
networks. The MAC address displays for port 1. The MAC address for port 2 is one higher. The MAC address for port 3 is
one higher than port 2. In redundant mode, the MAC addresses for ports 2 and 3 are the same as port 2.
PATH: ACTUAL VALUES
6
 FIRMWARE REVISIONS

The shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have been
installed.
6-26
 
PRODUCT INFO

MODEL INFORMATION

ORDER CODE LINE 1:
D30-E00-HCL-F8H-H6A
SERIAL NUMBER:
MESSAGE
ETHERNET MAC ADDRESS
MESSAGE
000000000000
MANUFACTURING DATE:
MESSAGE
0
CT/ VT ADVANCED DIAG
MESSAGE
ACTIVE: No
OPERATING TIME:
MESSAGE
0:00:00
LAST SETTING CHANGE:
MESSAGE
1970/01/01 23:11:19
— UR devices with firmware 7.0x and above have three Ethernet ports that can be used on three
 
PRODUCT INFO FIRMWARE REVISIONS
D30 Line Relay
REVISION:
MODIFICATION FILE
MESSAGE
NUMBER:
BOOT PROGRAM
MESSAGE
REVISION:
FRONT PANEL PROGRAM
MESSAGE
REVISION:
COMPILE DATE:
MESSAGE
2012/09/15 04:55:16
BOOT DATE:
MESSAGE
2012/09/15 16:41:32
D30 Line Distance Protection System
Range: standard GE order code format;
example order code shown
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
Range: Yes, No
Range: operating time in HH:MM:SS
Range: YYYY/MM/DD HH:MM:SS
Range: 0.00 to 655.35
Revision number of the application firmware.
7.2x
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.
0
Range: 0.00 to 655.35
Revision number of the boot program firmware.
3.01
Range: 0.00 to 655.35
Revision number of faceplate program firmware.
2.01
Range: Any valid date and time.
Date and time when product firmware was built.
Range: Any valid date and time.
Date and time when the boot program was built.
6 ACTUAL VALUES
6.5.1 MODEL INFORMATION
6.5.2 FIRMWARE REVISIONS
GE Multilin