GE D30 Instruction Manual page 238

5.4 SYSTEM SETUP
This configuration could be used on a two-winding transformer, with one winding connected into a breaker-and-a-half sys-
tem. The following figure shows the arrangement of sources used to provide the functions required in this application, and
the CT/VT inputs that are used to provide the data.
5
Y LV
SRC 1
Phase CT M1
Ground CT M1
Phase VT M5
Aux VT None
5-102
Figure 5–25: EXAMPLE USE OF SOURCES
D HV AUX
SRC 2 SRC 3
F1+F5 None
None None
None None
None U1
D30 Line Distance Protection System
5 SETTINGS
GE Multilin