Sources - GE D30 Instruction Manual

6 ACTUAL VALUES
a) MAIN MENU

PATH: ACTUAL VALUES METERING
 SOURCE SRC 1

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power val-
ues will be unavailable.
b) PHASE CURRENT METERING

PATH: ACTUAL VALUES METERING
 PHASE CURRENT
 SRC 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
GE Multilin

SOURCE SRC1
 PHASE CURRENT
 SRC 1
 GROUND CURRENT
 SRC 1
 PHASE VOLTAGE
 SRC 1
 AUXILIARY VOLTAGE
 SRC 1
 POWER
 SRC 1
 FREQUENCY
 SRC 1
 
SOURCE SRC 1 PHASE CURRENT
SRC 1 RMS Ia: 0.000
b: 0.000 c: 0.000
SRC 1 RMS Ia:
0.000 A
SRC 1 RMS Ib:
0.000 A
SRC 1 RMS Ic:
0.000 A
SRC 1 RMS In:
0.000 A
SRC 1 PHASOR Ia:
0.000 A 0.0°
SRC 1 PHASOR Ib:
0.000 A 0.0°
SRC 1 PHASOR Ic:
0.000 A 0.0°
SRC 1 PHASOR In:
0.000 A 0.0°
SRC 1 ZERO SEQ I0:
0.000 A 0.0°
SRC 1 POS SEQ I1:
0.000 A 0.0°
D30 Line Distance Protection System
See page 6–15.
See page 6–16.
See page 6–16.
See page 6–17.
See page 6–17.
See page 6–18.
A
6.3 METERING

6.3.2 SOURCES

6
6-15