E.1.2 Point List - GE D30 Instruction Manual

APPENDIX E
Maximum range of values k:
Maximum range of values w:
Portnumber:
PARAMETER VALUE
Portnumber 2404
RFC 2200 suite:
RFC 2200 is an official Internet Standard which describes the state of standardization of protocols used in the Internet
as determined by the Internet Architecture Board (IAB). It offers a broad spectrum of actual standards used in the Inter-
net. The suitable selection of documents from RFC 2200 defined in this standard for given projects has to be chosen
by the user of this standard.
 Ethernet 802.3
 Serial X.21 interface
 Other selection(s) from RFC 2200 (list below if selected)
The IEC 60870-5-104 data points are configured through the
menu. See the Communications section of chapter 5 for details.
IEC104 POINT LISTS
GE Multilin
15
1 to 32767 (2 – 1) APDUs, accuracy 1 APDU
1 to 32767 APDUs, accuracy 1 APDU
Recommendation: w should not exceed two-thirds of k.
REMARKS
In all cases
SETTINGS
D30 Line Distance Protection System
E.1 IEC 60870-5-104 PROTOCOL
 
PRODUCT SETUP COMMUNICATIONS

E.1.2 POINT LIST


DNP /
E
E-9