Rtrv-Alm Output Fields - Symmetricom TimeProvider 1100 Reference Manual

Chapter 2 TL1 Command Syntax and Description
Retrieve Alarm Condition (RTRV-ALM)
Parameter
<aid>
(cont'd)
Command Output
The following shows the output format of the command, and
various fields in the command output:
Response Format
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"<aid>,aidtype:ntfcncde,condtype,srveff,ocrdat,ocrtim[:condscr]"<cr><lf>
"<aid>,aidtype:ntfcncde,condtype,srveff,ocrdat,ocrtim[:condscr]"<cr><lf>
.
.
"<aid>,aidtype:ntfcncde,condtype,srveff,ocrdat,ocrtim[:condscr]"<cr><lf>
;
Table 2-9. RTRV-ALM Output Fields
Field
aidtype Specifies if the event is associated with the internal operation of the system (EQPT),
or external to the system or facility (T1).
ntfcncde The notification code for the alarm or event. The notification code can be CR (critical
alarm), MJ (major alarm), or MN (minor alarm). If the alarm is set to NA, then this
field is empty.
condtype The TL1 alarm code that is associated with the event or alarm.
Note: Table B-2
types).
srveff Whether the event is service affecting (SA) or non-service affecting (NSA).
ocrdat The date the event occurred, in the format YY-MM-DD.
ocrtim The time that the event occurred, in the format HH:MM:SS.
condscr The description of the alarm or event. It is a quoted text string, preceded with the "\"
escape character.
Note: Table B-2
(condition strings).
74 TimeProvider TL1 Reference Guide
Value
E422g Retrieves information for all currently active alarms from the
specified EIA-422 output module.
g = "A" for the group marked "A" on the main shelf
g = "B" for the group marked "B" on the main shelf
g = "C" for the group marked "C" on the main shelf
g = "D" for the group marked "D" on the main shelf
shows all of the possible TimeProvider TL1 alarm codes (condition
shows all of the possible TimeProvider alarm descriptions
Description
Description
097-58001-01 Revision E – September 2006
Table 2-9 explains the