Performance Monitoring Commands - Symmetricom TimeProvider 1100 Reference Manual

Table A-2. System Commands (Continued)
Command
Retrieve BesTime Status
(RTRV-BESTIME-STAT), on
page 79
Retrieve Built-In Self Test
(RTRV-BIST), on page 81
Retrieve Condition (RTRV-COND),
on page 87
Retrieve Craft Data
(RTRV-CRAFT), on page 92
Retrieve GPS Status
(RTRV-GPS-STAT), on page 103
Retrieve Header (RTRV-HDR), on
page 104
Retrieve Inventory (RTRV-INV), on
page 105
Retrieve LED Status (RTRV-LED),
on page 107
Retrieve Network Equipment Type
(RTRV-NETYPE), on page 113
Retrieve NTP Information
(RTRV-NTP-PEER), on page 114
Remove Equipment (RMV-EQPT),
on page 71
Table A-3. Performance Monitoring Commands
Command
Retrieve PM (RTRV-PM), on
page 116
Delete Performance Monitoring
Data (DLT-PM-DATA), on page 38
Set Threshold (SET-TH), on
page 136
Retrieve Threshold (RTRV-TH), on
page 126
Set Attribute (SET-ATTR), on
page 131
097-58001-01 Revision E – September 2006
Displays the BesTime status, the data indicates predicted
BesTime ensemble information
Displays all currently active faulted built-in self test information
for either the IMC or IOC or both
Retrieves information about the current state and status of
system components
Retrieves information about the system state, clock mode of
operation, input provisioning, and output provisioning
Displays the position of the GPS receiver, UTC time and status
information for each of the GPS satellites in view
Displays the response header information, including the system
identifier (<sid>), and the system date and time
Retrieves the system inventory
Retrieves the current state (color) of the various LED indicators
that are on the panels of the IMC and IOC modules
Retrieves the network equipment (NE) type from the unit
Retrieves information about the NTP peer server
Allows the TimeProvider to test (ping) for network connectivity
Displays the current set of performance monitoring data for one
input channel
Deletes the current set of performance monitoring data for one
input channel
Sets the alarm threshold for performance monitored data, for
example MTIE and Fractional Frequency Offset
Displays the alarm level set for a particular alarm
Sets the alarm level that an event generates
Description
Description
TimeProvider TL1 Reference Guide 141
Appendix A