Edit Command Security (Ed-Cmd-Secu); Ed-Cmd-Secu - Keyword And Values For <Cid>=Text String - Symmetricom TimeProvider 1100 Reference Manual

Chapter 2 TL1 Command Syntax and Description

Edit Command Security (ED-CMD-SECU)

Edit Command Security (ED-CMD-SECU)
This command changes the access level of the specified command.
Note: The access level for the following commands is fixed and
cannot be changed: ACT-USER, CANC-USER, ED-CMD-SECU,
ED-USER-SECU, and ENT-USER-SECU.
This command has a default access level of ADMIN. This command's access level
cannot be changed.
Syntax
ED-CMD-SECU:[<tid>]:<cid>:[<ctag>][::<keyword>=<value>];
Parameter
<cid>
Table 2-3. ED-CMD-SECU – Keyword and Values for <cid>=text string
<keyword> <value>
ACCLVL NONE
USER
ADMIN
SECURITY
42 TimeProvider TL1 Reference Guide
Value
text string The identifier of the command for which the access level is
being changed. The command identifier is the part of the
command syntax that appears before the first colon
( : ). It is not case-sensitive.
Note: See
FACTORY The access levels for all commands are set to their factory-
defined values.
Note: If FACTORY is used, no keyword is required and is
ignored if used.
The specified command allows any user to use it, even if
the user is not currently logged on to the system.
The specified command allows users with an access level
of USER, ADMIN, and SECURITY to use it.
The specified command allows users with an access level
of ADMIN and SECURITY to use it.
The specified command allows users with an access level
of SECURITY to use it.
Description
Table 2-3 for <keyword> and <value> descriptions.
Description
097-58001-01 Revision E – September 2006
Default
N/A