Set Threshold (Set-Th); Set-Th - Keywords And Values For All <Aids - Symmetricom TimeProvider 1100 Reference Manual

Chapter 2 TL1 Command Syntax and Description

Set Threshold (SET-TH)

Set Threshold (SET-TH)
This command sets the alarm threshold for performance monitored data, for
example MTIE and Fractional Frequency Offset.
This command has a default access level of ADMIN.
Syntax
SET-TH:[<tid>]:<aid>:[<ctag>]::<keyword>[=<value>];
Parameter
<aid>
Table 2-35. SET-TH – Keywords and Values for all <aids>
<keyword> <value>
MASK GPS–R | PRS |
DS1 | OCN | PRC
| TYPEI | TYPEII
MTIE-1 1 to 5000000
MTIE-5 1 to 5000000
MTIE-10 1 to 5000000
MTIE-50 1 to 5000000
MTIE-100 1 to 5000000
MTIE-500 1 to 5000000
136 TimeProvider TL1 Reference Guide
Value
See Table 2-35
GPS The command's effect is on the GPS system input.
PRS The command's effect is on the PRS system input.
INP1 The command's effect is on the INP1 system input.
INP2 The command's effect is on the INP2 system input.
RTMg[-p] The command's effect is on the specified Retimer module [and
Port]:
g = "A" for the group marked "A" on the main shelf
g = "B" for the group marked "B" on the main shelf
g = "C" for the group marked "C" on the main shelf
g = "D" for the group marked "D" on the main shelf
p = "1" for Port 1 on the Retimer module
p = "2" for Port 2 on the Retimer module
Set MTIE-x and FFOFF-60 thresholds to predefined
settings.
1-Second MTIE observation threshold defined in ns
5-Second MTIE observation threshold defined in ns
10-Second MTIE observation threshold defined in ns 100 000
50-Second MTIE observation threshold defined in ns 500 000
100-Second MTIE observation threshold defined in ns 1 000 00
500-Second MTIE observation threshold defined in ns 5 000 000
Description
for <keyword> and <value> descriptions
Description
097-58001-01 Revision E – September 2006
Default
See
Table 2-36
10 000
50 000