Retrieve Equipment (RTRV-EQPT)
This command retrieves currently provisioned equipment parameters.
This command has a default access level of USER.
Note: See
and descriptions of their possible <values>.
Syntax
RTRV-EQPT:[<tid>]:<aid>:[<ctag>]::<keyword>;
Parameter
<aid>
097-58001-01 Revision E – September 2006
Edit Equipment
(ED-EQPT), on page 45 for <keywords>
Value
SYS
Equipment settings for system-level.
COMp
Equipment settings for the communication port specified by p:
p = "L" for the local serial port
p = "R" for the remote serial port
p = "I" for the IP (Ethernet) port
IOCm
Equipment settings for the IOC module specified by m:
m = "1" for the slot marked "IOC 1" on the main shelf
m = "2" for the slot marked "IOC 2" on the main shelf
GPS
Equipment settings for the GPS system input.
PRS
Equipment settings for the PRS system input.
INPp
Equipment settings for the input port specified by p:
p = "1" for the input marked INP 1 on the Input Connector
module
p = "2" for the input marked INP 2 on the Input Connector
module
OUTg
Equipment settings for the output group specified by g:
g = "A" for the group marked "A" on the main shelf
g = "B" for the group marked "B" on the main shelf
g = "C" for the group marked "C" on the main shelf
g = "D" for the group marked "D" on the main shelf
E422g
Equipment settings for the EIA-422 output group specified by
g:
g = "A" for the group marked "A" on the main shelf
g = "B" for the group marked "B" on the main shelf
g = "C" for the group marked "C" on the main shelf
g = "D" for the group marked "D" on the main shelf
Chapter 2 TL1 Command Syntax and Description
Retrieve Equipment (RTRV-EQPT)
Description
TimeProvider TL1 Reference Guide 101