Delete Security (Dlt-Secu) - Symmetricom TimeProvider 1100 Reference Manual

Delete Security (DLT-SECU)

This command deletes all of the information from the user database.
This command has a default access level of SECURITY.
Syntax
DLT-SECU:[<tid>]::[<ctag>];
Note: The DLT-SECU command is typically used only after the initial
installation of the TimeProvider. When issued, all existing user names
and passwords are deleted from the user database. Anyone who logs
in to the TimeProvider in this condition has access to all commands.
Example
To delete all information from the user database, which includes three entries in this
example:
Input
DLT-SECU:::TP1000;
Normal Response
TP-SSU
M TP1000 COMPLD
;
Field
USRCLR
Autonomous Message
TP-SSU 05-02-10 13:35:57
A 266 REPT EVT
"IMC,EQPT:USRDEL,TC,05-02-10,13-35-57,,,,:\"USER HAS BEEN DELETED\""
;
097-58001-01 Revision E – September 2006
05-02-10 13:35:56
All users have been deleted from the database.
Chapter 2 TL1 Command Syntax and Description
Description
TimeProvider TL1 Reference Guide
Delete Security (DLT-SECU)
39