Retrieve Gps Status (Rtrv-Gps-Stat); Rtrv-Gps-Stat Output Fields - Symmetricom TimeProvider 1100 Reference Manual

Retrieve GPS Status (RTRV-GPS-STAT)

This command displays the position of the GPS receiver, UTC time and status
information for each of the GPS satellites in view.
This command has a default access level of USER.
Syntax
RTRV-GPS-STAT:[<tid>]::[<ctag>];
Table 2-19. RTRV-GPS-STAT Output Fields
Field
mode
pos
sv
hlth
snr
svel
svaz
Command Output
The following shows the output format of the command, and
various fields in the command output:
Response Format
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"GPS:<mode>,<pos>"<cr><lf>
"GPS:<sv>,<hlth>,<snr>,<svel>,<svaz>"<cr><lf>
;
Example
To display the current GPS status:
Input
RTRV-GPS-STAT:::TP1000;
Response Example
TP-SSU 05-02-10 13:37:39
M TP1000 COMPLD
"GPS:AUTO,0-0-0.0N,0-0-0.0E,0.0"
;
Autonomous Message
None
097-58001-01 Revision E – September 2006
Description
The GPS Positioning Mode
dd-mm-ss.ss(N or S),dd-mm-ss.ss (E or W), +/-hhhh.h
Satellite Vehicle Number, 0 through 32
Satellite Health, OK | UNH
Signal to noise ratio, rr
Satellite Elevation, dd (degrees)
Satellite Azimuth, ddd (degrees)
Chapter 2 TL1 Command Syntax and Description
Retrieve GPS Status (RTRV-GPS-STAT)
Table 2-19
TimeProvider TL1 Reference Guide 103
explains the