Ed-Eqpt - Keywords And Values - Symmetricom TimeProvider 1100 Reference Manual

Chapter 2 TL1 Command Syntax and Description
Edit Equipment (ED-EQPT)
Parameter
<aid>
cont'd
Table 2-5. ED-EQPT – Keywords and Values
<keyword> <value>
INACTTIME 100 –
10000
LOGECHO ENABLE
DISABLE
AOMERGE ENABLE
DISABLE
ECHO ENABLE
DISABLE
TIDQUIET ENABLE
DISABLE
46 TimeProvider TL1 Reference Guide
Value
See Table 2-5
E422g The command's effect is on the EIA-422 output group
specified by g:
g = "A" for the group marked "A" on the main shelf
g = "B" for the group marked "B" on the main shelf
g = "C" for the group marked "C" on the main shelf
g = "D" for the group marked "D" on the main shelf
<aid> = SYS
The amount of user command inactivity time to be set.
This determines the amount of inactivity time before the
user is automatically logged off of the system.
The range for time is 100 to 10000 in increments of 0.1
seconds. A value of 0 disables automatic logoff.
Login and logout events are echoed to the local terminal
and stored in the event log.
Login and logout events are not echoed to the local
terminal and are not stored in the event log.
<aid> = COML | COMR | COMI
Autonomous messages are displayed in the current
session.
Autonomous messages are not displayed in the current
session.
Input is echoed to the local terminal.
Input is not echoed to the local terminal.
The TID is not echoed in response messages.
The TID is echoed in response messages.
Description
for <keyword> and <value> descriptions.
Description
097-58001-01 Revision E – September 2006
Default
0
ENABLE
ENABLE
DISABLE
DISABLE