2.3 Configure the Speaker Parameters
To configure the speaker online, use a standard web browser.
Configuration of the speaker is taken care of by the InformaCast server. If an InformaCast server can
not be found, the speaker will return to factory defaults as shown in
Parameter
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
Operations Guide
Table 2-4. Factory Network Default Settings—Default of Network
a
a
a
a. Default if there is not a DHCP server present.
Factory Default Setting
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
931251F
Installing the Singlewire InformaCast Speaker
Configure the Speaker Parameters
Table
2-4.
CyberData Corporation
21
Need help?
Do you have a question about the 011395 and is the answer not in the manual?
Questions and answers