Configure The Speaker Parameters - CyberData 011098A Operation Manual

2.3 Configure the Speaker Parameters

To configure the speaker online, use a standard web browser.
Configure each speaker and verify its operation before you mount it. When you are ready to mount a
speaker, refer to
All speakers are initially configured with the default IP settings indicated in
Note
Parameter
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
a. Default if there is not a DHCP server present.
Operations Guide
Appendix A, "Mounting the Speaker"
When configuring more than one speaker, attach the speakers to the network and configure
one at a time to avoid IP address conflicts
Table 2-3. Factory Network Default Settings—Default of Network
a
a
a
930274I
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
for instructions.
Factory Default Setting
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
Table 2-3:
CyberData Corporation
20