2.3 Configure the Speaker Parameters
To configure the speaker online, use a standard web browser.
Configure each speaker and verify its operation
a speaker, refer to
2.3.1 Default IP Settings
All speakers are initially configured with the default IP settings indicated in
Note
Parameter
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
Operations Guide
Appendix A, "Mounting the Speaker"
When configuring more than one speaker, attach the speakers to the network and configure
one at a time to avoid IP address conflicts
Table 2-3. Factory Network Default Settings—Default of Network
a
a
a
a. Default if there is not a DHCP server present.
before
you mount it. When you are ready to mount
for instructions.
Factory Default Setting
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
930274O
Installing the VoIP V2 Speaker
Default IP Settings
Table
2-3:
CyberData Corporation
19