How To Set The Factory Default Settings - CyberData 011395 Operation Manual

2.2.6 How to Set the Factory Default Settings

2.2.6.1 RTFM Switch
When the speaker is operational and linked to the network, use the Reset Test Function
Management (RTFM) switch
To set the factory default settings:
1. Press and hold the RTFM switch for more than five seconds.
2. The speaker announces that it is restoring the factory default settings.
Note
Operations Guide
(Figure
The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
931251F
Installing the Singlewire InformaCast Speaker
2-15) on the speaker face to set the factory default settings.
Figure 2-15. RTFM Switch
Set Up and Test the Speaker
RTFM button
CyberData Corporation
20