I
BAG E (Continued)
®
0
Fig
56.
Step 21. Make sure that the dog bones (97) are in the
outdrives (47) before continuing.
Step 22. Insert a 4-40 x 1/2" cap head screw (124) into
the hole in the swivel ball (116).
Step 23. Attach the bottom of the shock to the rear arm
(93), (94) by threading the 4-40
x
1/2" cap head screw (124)
into the outside shock mounting hole of the arm (93), (94).
Step 24. Place the top of the shock body (120) over the
shock mount bushing (3) on the rear shock tower (96) and
secure it with a 4-40 lock nut (5).
*Note: Before attaching the top of the shock, make sure
that the dog bone is in place in the outdrive.
Step 25. Repeat steps 22 - 24 for the second rear shock.
~
[jmlll~lllllllllllllllllllllll
®
0
Fig
57.
Step 26. Insert the shock end (115) of a front shock
between the shock mounting rails of the front suspension arm
(8), (9) and line up the hole in the swivel ball (116) with the
middle hole in the arm (8), (9).
Step 27. Attach the shock end (115) to the front arm (8),
(9) by threading a 4-40 x 1 /2" cap head screw (124) all the way
into the arm (8), (9).
Step 28. Place the top of the shock body (119) over the
shock mount bushing (3) on the front shock tower (2) and
secure it with a 4-40 lock nut (5).
Step 29. Repeat steps 26- 28 for the second front shock.
Figure 56
Figure 57
25