Table of Contents
Advertisement
[I
BAG D (Continued)
Fig 41.
Step 6. Attach the rear shock tower (96) to the back of
the transmission with four 4-40 x 3/8" cap head screws (14).
The shock mount bushings (3) should face the rear as shown.
®
Fig 42.
Step 7. Place the completed transmission between the
rear suspension pivots (91 ), (95) as shown.
Step 8. Secure the transmission to the chassis (27) with
four 4-40 x 3/8" flat head screws (31).
Step 9. Attach the transmission brace (75) to the center
chassis brace (37) with two 4-40 x 3/8" cap head screws (14).
Fig 43.
Step 10. Attach the dog bones (97) to the plastic univer-
sal yokes (98) by lining up the slot on the dog bone (97) with
the groove in the universal yoke (98). Secure the two pieces
with a 4-40 x 3/8" cap head screw (14).
~
A small amount of thread lock compound on the
threads of the 4-40 x 3/8" screws will help keep them tight.
18
3
14
95
I
I
I
J
96
Figure 42
Figure 43
75
37
Advertisement
Table of Contents
