11.4 AUGER REPLACEMENT
First, remove the top cover of the
blower
housing.
Completely
remove the two set screws of the
bottom auger and remove the
motor (see Section 11.3: The
Auger motor).
Then remove the furnace's jacket
front panel, open the combustion
chamber door and remove the
burn pot.
Unscrew the two screws on the
access plate (1) in front of the pot
receptacle. Then unscrew the two
screws that hold in place the
igniter and the igniter support (2).
Once unscrewed, move it to the
left or right side to give space in
the center to remove the auger.
76