If the fire gets uncontrollable due to an improper use or because the draft is too strong, follow the same
procedure as in a chimney fire.
LOCAL FIRE DEPARTMENT Phone number: ___________________________________
9 MAINTENANCE
9.1
MAINTENANCE OF THE HEAT EXCHANGER AND BAFFLE
The heat exchanger is to be cleaned thoroughly at the end of each heating season. During the summer air is
more humid with minimal natural flow in the furnace, in these conditions, remaining creosote and/or soot in the
exchanger will produce an acid that will accelerate the corrosion process and will perforate the steel prematurely,
which in return, would not be covered under the warranty. To properly clean the heat exchanger, you will need
to access the following four access doors:
To access the six exchanger pipes, remove the front access panel of the furnace's jacket.
53