Hopper Removal - PSG CADDY ALTERNA II Installation And Operating Instructions Manual

5.1.1 HOPPER REMOVAL

1. Remove the screws
(8) located at the
bottom of the hopper.
Then, slightly
unscrew the vertical
panel screws (4).
2. Disconnect the
hopper switch's
connector
removing the right
side panel to access
the connector.
3. After the bottom
screws are removed
and the vertical panel
screws are slightly
unscrewed, gently lift
the hopper to clear
the screws heads
and pull the hopper
towards the back.
by
12