Hard-Surface Ceiling And Wall Installation - Allied Telesis AT-MWS600AP Installation Manual

Hard-Surface
Ceiling and Wall
Installation
This section explains how to install the access point on the hard-surface
ceiling or wall.
What to Prepare for the Hard-Surface Ceiling or Wall Installation
You need the following items to install the access point on a ceiling or wall:
AT-MWS600AP or AT-MWS1750AP access point

Two screws to attach to the access point directly

Mounting base

Two screws for the mounting base

Phillips-head screwdriver

Pencil

Note
A Phillip-head screwdriver and pencil are not included in the
shipping box.
Installing the Access Point on the Hard-Surface Celling or Wall
To install the access point on the hard-surface celling or wall, perform the
following procedure:
Note
Attaching the access point to the mounting base may not be easy
once the mounting base is installed on the hard-surface ceiling or
wall. Practice Step 12 and Step 13 before installing the mounting
base on a hard-surface ceiling or wall.
1. Read "Reviewing Safety Precautions" on page 28.
2. Review "Guidelines for Installing the AT-MWS600AP or
AT-MWS1750AP Access Point" on page 46.
MWS Series Access Point Installation Guide
47