AT-MWS2533AP
The LEDs for the AT-MWS2533AP model display status information as
shown in Table 4.
Table 4. LEDs for the AT-MWS2533AP Access Point
LED
Power
Green
Blinking Green
Off
Blinking Amber
LAN 1
Green
Blinking Green
Amber
Blinking Amber
Off
LAN 2
Green
Blinking Green
Amber
Blinking Amber
Off
2.4GHz Wi-Fi
Green
Blinking Green
Off
State
The access point is powered ON and
operating normally.
The access point is rebooting or
software is upgrading.
The access point is not receiving
power.
The configuration has being reset to
the factory default settings.
A valid link is established on the port
at 1000Mbps.
Data is being transmitted/received at
1000Mbps.
A valid link is established on the port
at 10Mbps or 100Mbps.
Data is being transmitted/received at
10 Mbps or 100Mbps.
No link is established.
A valid link is established on the port
at 1000Mbps.
Data is being transmitted/received at
1000Mbps.
A valid link is established on the port
at 10Mbps or 100Mbps.
Data is being transmitted/received at
10 Mbps or 100Mbps.
No link is established.
The 2.4GHz Wi-Fi interface is
enabled.
Data is being transmitted/received at
the 2.4GHz frequency band.
The 2.4GHz Wi-Fi interface is
disabled.
MWS Series Access Point Installation Guide
Description
23