Allied Telesis AT-MWS600AP Installation Manual page 36

Mws series simultaneous dual band wireless access point

Hide thumbs Also See for AT-MWS600AP:

Table of Contents

Chapter 2: Installing the AT-MWS2533AP Access Point

Figure 9. Installing the Mounting Base Plate on the Ceiling or Wall

5. Insert the two pins on the mounting base plate into the circles of the

keyhole slots, as shown in Figure 10.

Figure 10. Aligning the Access Point with the Mounting Base Plate

6. Slide the access point to lock the necks of the mounting base plate

pins in the slots, as shown in Figure 11 on page 37.

Table of Contents

At-mws1750ap At-mws2533ap Mws series