Unpacking the AT-BRKT-MWS01 Mounting Base Plate
To unpack the AT-BRKT-MWS01 mounting base palate, perform the
following procedure:
Note
The AT-BRKT-MWS01 mounting base plate is not included in the
AT-MWS2533AP access point package. You must purchase the
mounting base plate separately.
1. Remove the AT-BRKT-MWS01 mounting base palate from the
shipping box and verify the product. See Figure 6.
Figure 6. AT-BRKT-MWS01 Mounting Base Plate
2. Save the packaging material in a safe location.
You must use the original shipping material if you need to return the
unit to Allied Telesis.
MWS Series Access Point Installation Guide
31