Redundant Power Supply; At-Mws600Ap And At-Mws1750Ap Power Supplies; At-Mws2533Ap Power Supply - Allied Telesis AT-MWS600AP Installation Manual

Chapter 1: Product Description

Redundant Power Supply

AT-MWS600AP
and
AT-MWS1750AP
Power Supplies
AT-MWS2533AP
Power Supply
Case
1
2
20
The MWS series access point offers a redundant power supply system. In
addition to the power supply through the DC jack, the access point has
one or two PoE+ capable LAN ports. When the power supply unit on the
access point fails, it switches to the PoE+ port to drain power.
The AT-MWS600AP and AT-MWS1750AP access points are equipped
with one PoE+ capable LAN port. The access points can drain power
through the DC jack. When power from the DC jack is not available, the
access point drains power through the LAN port. Table 1 shows where the
AT-MWS600AP and AT-MWS1750AP access points drain power.
Table 1. Power Source for the AT-MWS600AP and AT-MWS1750AP
Power Supply
Case
DC Jack
1 On
2 On
3 -
The AT-MWS2533AP access point is equipped with two PoE+ capable
LAN ports. The model can drain power through the DC jack. When power
from the DC jack is not available, it drains through the LAN2 port; when
power is not available through the DC jack or LAN2 port, it drains through
the LAN1 port. Table 2 shows where the AT-MWS2533AP model drains
power.
Table 2. Power Source for the AT-MWS2533AP Model
Power Supply
DC Jack LAN1 LAN2
On On
On On
Models
Where the Access Point drains power
LAN
The access point drains power through the
On
DC jack. The LAN port is standby.
The access point drains power through the
-
DC jack. No redundancy.
The access point drains power through the
On
LAN port. No redundancy.
Where the Access Point drains power
The access point drains power through the DC
On
jack. The both LAN ports are standby.
The access point drains power through the DC
-
jack. LAN1 is standby.