Chapter 2: Installing the AT-MWS2533AP Access Point
Unpacking the AT-MWS2533AP Access Point
30
To unpack the AT-MWS2533AP access point, perform the following
procedure:
1. Remove the AT-MWS2533AP access point from the shipping box.
2. Save the packaging material in a safe location.
You must use the original shipping material if you need to return the
unit to Allied Telesis.
Note
To install the AT-MWS2533AP access point on a ceiling or wall, you
must purchase the AT-BRKT-MWS01 mounting base plate
separately.
Note
To build a redundant power supply system with the power s from the
DC jack, you must purchase the AT-MWS0091 AC adapter kits
separately.