Leds; Leds For At-Mws600Ap And; At-Mws1750Ap Models - Allied Telesis AT-MWS600AP Installation Manual

Chapter 1: Product Description

LEDs

LEDs for
AT-MWS600AP
and
AT-MWS1750AP
Models
22
The LEDs on the top panel of the MWS series access point display status
information.
The LEDs for theAT-MWS600AP and AT-MWS1750AP access points
display status information as shown in Table 3.
Table 3. LEDs for theAT-MWS600AP and AT-MWS1750AP Access Points
LED
Power Orange
Off
LAN Blue
Blinking Blue
Off
2.4GHz Wi-Fi Blue
Blinking Blue
Off
5 GHz Wi-Fi Green
Blinking Green
Off
State
The access power is powered ON and
operating normally.
The access point is not receiving
power.
A valid link is established on the port.
Data is being transmitted/received.
No link is established.
The 2.4GHz Wi-Fi interface is enabled.
Data is being transmitted/received at
the 2.4GHz frequency band.
The 2.4GHz Wi-Fi interface is
disabled.
The 5GHz Wi-Fi interface is enabled.
Data is being transmitted/received at
the 5GHz frequency band.
The 5GHz Wi-Fi interface is disabled.
Not supported.
Description