Cable Specifications
Cable
Requirements
Maximum
Distance
To connect the MWS series access point to your LAN, you must provide
cables. Here are cable requirements and options.
The cable requirements for the LAN port are listed in Table 5.
Table 5. Twisted Pair Cable for the LAN Port
Cable Type
Standard TIA/EIA 568-A-compliant
Category 5 shielded or unshielded
cabling with 100 ohm impedance and
100 MHz frequency.
Standard TIA/EIA 568-B-compliant
Enhanced Category 5 (Cat 5e) shielded
or unshielded cabling with 100 ohm
impedance and 100 MHz frequency.
Standard TIA/EIA 568-B-compliant
Category 6 or 6a shielded cabling.
The LAN port has a maximum operating distance of 100 meters (328 feet).
MWS Series Access Point Installation Guide
10Mbps 100Mbps 1000Mbps
PoE+
PoE+
Yes
Yes
Yes
Yes
Yes
Yes
PoE+
No
Yes
Yes
25