Reviewing Safety Precautions - Allied Telesis AT-MWS600AP Installation Manual

Chapter 2: Installing the AT-MWS2533AP Access Point

Reviewing Safety Precautions

28
Please review the following safety precautions before you begin to install
the access point.
Note
The indicates that a translation of the safety statement is

available in a PDF document titled Translated Safety Statements on
the Allied Telesis website at www.alliedtelesis.com/support.
Warning
To prevent electric shock, do not remove the cover. No user-
serviceable parts inside. This unit contains hazardous voltages and
should only be opened by a trained and qualified technician. To
avoid the possibility of electric shock, disconnect electric power to
the product before connecting or disconnecting the LAN cables.
E1

Warning
Do not work on equipment or cables during periods of lightning
activity. E2

Note
All Countries: Install product in accordance with local and National
Electrical Codes.
Note
You should verify that your PoE network adheres to the standards of
a separated extra-low voltage (SELV) circuit before using the PoE
feature on the wireless access point.
Warning
Only trained and qualified personnel are allowed to install or to
replace this equipment.
E8

E14
