Assembling The At-Mws0091 Ac Adapter - Allied Telesis AT-MWS600AP Installation Manual

Chapter 2: Installing the AT-MWS2533AP Access Point

Assembling the AT-MWS0091 AC Adapter

40
The AT-MWS0091 AC adapter is shipped with the AC plug for USA
attached. When the AC socket on your wall is other than the USA type,
you can change it to another AC plug for Europe, UK, or Australia.
To change the AC plug on the AT-MWS0091 AC adapter, perform the
following procedure:
1. Select one from the optional AC plugs. See Table 6 on page 32.
2. While pressing the release tab with your thumb, slide the AC plug as
shown in Figure 15.
Figure 15. Detaching the AC Plug from the AC Adapter
3. Remove the AC plug from the AC adapter as shown in Figure 16.
Figure 16. Removing the AC Plug from the AC Adapter
4. Attach the AC plug that you selected to the AC adapter in shown in
Figure 17 on page 41.