Allied Telesis AT-TQ5403e Installation Manual
  1. Manuals
  2. Brands
  3. Allied Telesis Manuals
  4. Wireless Access Point
  5. AT-TQ5403e
  6. Installation manual

Allied Telesis AT-TQ5403e Installation Manual

Enterprise-class outdoor wireless access point with ieee802.11a/b/g/n/ac tri-radio
Hide thumbs Also See for AT-TQ5403e:
Table of Contents

Advertisement

Quick Links

Download this manual
Draft 5 on February 14, 2019
AT-TQ5403e
Enterprise-Class Outdoor Wireless Access Point
with IEEE802.11a/b/g/n/ac Tri-Radio
Installation Guide
613-002655 Rev. A

Advertisement

Table of Contents
loading

Related Manuals for Allied Telesis AT-TQ5403e

Summary of Contents for Allied Telesis AT-TQ5403e

  • Page 1 Draft 5 on February 14, 2019 AT-TQ5403e Enterprise-Class Outdoor Wireless Access Point with IEEE802.11a/b/g/n/ac Tri-Radio Installation Guide 613-002655 Rev. A...
  • Page 2 Allied Telesis, Inc. has been advised of, known, or should have known, the...
  • Page 3 This product meets the following standards: Federal Communications Commission Interference Statement Declaration of Conformity Manufacturer Name: Allied Telesis, Inc. Declares that the product: Enterprise-class Outdoor Wireless Access Point Model Number: AT-TQ5403e This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 4 European Union Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment This Allied Telesis RoHS-compliant product conforms to the European Union Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment. Allied Telesis ensures RoHS conformance by requiring supplier Declarations of Conformity, monitoring incoming materials, and maintaining manufacturing process controls.
  • Page 5 EN 62368-1  UL 62368-1  IEC 62368-1  Translated Safety Statements Important: The indicates that a translation of the safety statement is available in a PDF document  titled Translated Safety Statements on the Allied Telesis website at www.alliedtelesis.com/support.

  • Page 6: Table Of Contents

    Draft 5 on February 14, 2019 Contents Preface ................................9 Safety Symbols Used in this Document ..................... 10 Professional Installation Instructions......................11 Contacting Allied Telesis..........................12 Chapter 1: Product Description ........................13 Overview ..............................14 Features ..............................16 LEDs ................................17 LAN Port..............................18 Power over Ethernet (PoE)........................
  • Page 7 Draft 5 on February 14, 2019 Contents Antenna Specifications ..........................48 LAN Port ..............................49 Safety and Electromagnetic Emissions Certifications ................51 Operation Frequency Information....................... 52 IC Statements............................. 53 IC Radiation Exposure Statement......................53 Déclaration d’exposition à la radiation ....................53 Caution..............................

  • Page 8: Preface

    Draft 5 on February 14, 2019 Preface This guide contains the hardware installation instructions for the AT-TQ5403e Enterprise-Class Outdoor Wireless Access Point. This preface contains the following sections: “Safety Symbols Used in this Document” on page 10  “Professional Installation Instructions” on page 11 ...

  • Page 9: Safety Symbols Used In This Document

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Safety Symbols Used in this Document This document uses the following conventions. Note Notes provide additional information. Caution Cautions inform you that performing or omitting a specific action may result in equipment damage or loss of data.

  • Page 10: Professional Installation Instructions

    Draft 5 on February 14, 2019 Preface Professional Installation Instructions You must comply with the following cautions: Installation personal  This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge.

  • Page 11: Contacting Allied Telesis

    AT-TQ5403e Outdoor Wireless Access Point Installation Guide Contacting Allied Telesis If you need assistance with this product, you may contact Allied Telesis technical support by going to the Support & Services section of the Allied Telesis web site at www.alliedtelesis.com/support. You can find links for the following services on this page: 24/7 Online Support —...

  • Page 12: Draft 5 On February

    Draft 5 on February 14, 2019 Chapter 1 Product Description This chapter describes the hardware components of the AT-TQ5403e access point. This chapter contains the following sections: “Overview” on page 14  “Features” on page 16  “LEDs” on page 17 ...

  • Page 13: Draft 5 On February

    This device can be mounted on a wall or pole. The AT-TQ5403e access point is illustrated in Figure 1. Figure 1. AT-TQ5403e Access Point The front panel components of the AT-TQ5403e access point are illustrated in Figure 2. 5GHz Antenna...

  • Page 14: Chapter 1: Product Description

    Draft 5 on February 14, 2019 Chapter 1: Product Description The back panel components of the AT-TQ5403e access point are illustrated in Figure 3. ® vent Gore 2.4GHz Antenna 5GHz Antenna Connector Connector 5GHz Antenna Connector 2.4GHz Antenna Connector Figure 3. AT-TQ5403e Access Point Antenna Back Panel The components are listed in Table 1.

  • Page 15: Features

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Features The main features of the product are listed here: Tri-radio: 2.4 GHz x 1 and 5 GHz x 2  IEEE 802.11a/b/g/n/ac  2x2:2ss MIMO ...

  • Page 16: Leds

    Draft 5 on February 14, 2019 Chapter 1: Product Description LEDs The LEDs on the AT-TQ5403e access point are described in Table 2. Table 2. LEDs State Description Solid Green A link is established and the port is operating normally.

  • Page 17: Lan Port

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide LAN Port The AT-TQ5403e access point has one LAN port to connect to your Local Area Network (LAN), typically through an Ethernet switch. Power over The AT-TQ5403e access point supports Power over Ethernet Plus (PoE+) on the LAN port.

  • Page 18: Automatic Mdix Detection

    Draft 5 on February 14, 2019 Chapter 1: Product Description Automatic MDIX The 10/100/1000 Mbps twisted-pair port is IEEE 802.3ab compliant and features automatic MDIX detection when operating at 10 or 100 Mbps. Detection (Automatic MDIX detection does not apply to 1000 Mbps.) This feature automatically configures the port to MDI or MDI-X depending on the wiring configuration of the port on the Ethernet switch.

  • Page 19: Reset Button

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Reset Button The reset button on the front panel is used to return the parameter settings of the device to its default values. You might use the button if you want to discard the current configuration of the device or because you forgot the password to the manager account and cannot manage the device.

  • Page 20: Cable Specifications

    Draft 5 on February 14, 2019 Chapter 1: Product Description Cable Specifications To connect the AT-TQ5403e Access Point to your LAN, you must provide cables. Here are cable requirements and options. Cable The cable requirements for the LAN port are listed in Table 3.

  • Page 21: Chapter 2: Installing The Access Point

    Draft 5 on February 14, 2019 Chapter 2 Installing the Access Point This chapter describes how to install the AT-TQ5403e access point. This chapter contains the following sections: “Reviewing Safety Precautions” on page 24  “Unpacking the Access Point” on page 27 ...

  • Page 22: Reviewing Safety Precautions

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Reviewing Safety Precautions Please review the following safety precautions before you begin to install the access point. Note indicates that a translation of the safety statement is ...
  • Page 23 Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point Advertissement Température de fonctionnement. Ce produit est conçu pour une température ambiante maximale de 65 °C.  Caution FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
  • Page 24 Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Advertissement Cet équipement doit être installé dans un endroit à accès restreint.  Warning Hot Surface, Do Not Touch! - The finned surface on the back of the chassis is a heat sink and can become dangerously hot when the unit is operating.

  • Page 25: Unpacking The Access Point

    Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point Unpacking the Access Point To unpack the access point, perform the following procedure: 1. Remove all components from the shipping boxes. Note Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.
  • Page 26 Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Table 4. Components in the Shipping Boxes (Continued) Name Component 4 Sets of a Screw, Washer, and Spring Washer to attach the mount base to the access point...
  • Page 27 Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point 3. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

  • Page 28: Attaching The Ground Cable To The Access Point

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Attaching the Ground Cable to the Access Point To protect the device from lightning strikes and against electrostatic discharge (ESD), attach the ground cable to the access point.

  • Page 29: Attaching The Ground Cable To The Access Point

    Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point Attaching the To attach the ground cable to the access point, perform the following procedure: Ground Cable to the Access Point 1. Align the ground cable hole on the access point with the ring terminal of the ground cable.

  • Page 30: Connecting The Access Point With The Ethernet Cable

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Connecting the Access Point with the Ethernet Cable To connect the access point with the Ethernet cable, perform the following procedure: 1. Unscrew the cap at the LAN port to remove the cap from the access point.
  • Page 31 Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point Figure 7. Connecting the LAN Cable and Attaching the Sealing Nut 6. Connect the other RJ-45 plug to the PoE switch.

  • Page 32: Attaching The Antennas To The Access Point

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Attaching the Antennas to the Access Point To install the antennas, perform the following procedure: 1. Remove the blind caps covering the antenna connectors from the main unit.
  • Page 33 Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point 4. Repeat Step 2 and Step 3 for the rest of the antennas. See Figure 10. Figure 10. Installing the Antennas to the Access Point...

  • Page 34: Installing The Access Point On A Wall

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Installing the Access Point on a Wall The AT-TQ5403e access point can be mounted on a wall. To install the access point, perform the following procedures: Guidelines...

  • Page 35: What To Prepare For Wall Installation

    Chapter 2: Installing the Access Point Figure 12. Two Orientations of the Mounting Base What to Prepare You need the following items to install the access point on a wall: for Wall AT-TQ5403e Access Point  Installation Mounting base ...
  • Page 36 Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide 3. Using the mounting base as a template, mark four holes with a pencil. See Figure 13. Figure 13. Mounting Base Hole Dimensions 4. Pre-drill the marked locations on the wall.
  • Page 37 Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point 6. Install the four sets of bolts and wall anchors into the holes you made in Step 4. 7. Attach the nuts and washers to the bolts in the wall to install the access point unit.

  • Page 38: Installing The Access Point On A Pole

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Installing the Access Point on a Pole The AT-TQ5403e access point can be mounted on a vertical pole or horizontal pole. see Figure 16. Note The pole mount bracket is angle-adjustable.

  • Page 39: Installing The Access Point On A Pole

    Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point Note A Phillip-head screwdriver is not included in the shipping box. 10mm socket and ratchet or adjustable wrench (for adjusting the  position of the access point) Installing the To install the access point on a pole, perform the following procedure: Access Point on a 1.

  • Page 40: Adjusting The Position Upward Or Downward

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Figure 18. Attaching the Access Point to the Pole-Mount Brackets Adjusting the If you want to position the access point upward or downward, do the following procedures:...

  • Page 41: Starting The Initial Management Session On The Access Point

    Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point Starting the Initial Management Session on the Access Point The wireless access point firmware includes a DHCP client. The default setting for the client is enabled. When you power on the access point for the first time, it queries the subnet on the LAN port for a DHCP server.
  • Page 42 Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Figure 19. Login Window 4. Enter “manager” for the username and “friend” for the password. The username and password are case-sensitive.

  • Page 43: Setting The Country Setting

    Draft 5 on February 14, 2019 Chapter 2: Installing the Access Point Setting the Country Setting You should set the country setting during the initial management session of the access point to ensure that the device operates in compliance with the codes and regulations of your region or country.
  • Page 44 Note This procedure does not require clicking the Save & Apply button. Allied Telesis recommends rebooting the access point after changing the country settings. To reboot the unit, either power off on the unit or continue with these steps: 4.

  • Page 45: Appendix A: Technical Specifications And Statements

    Weight of the device 2.8 kg (6.2 lb.) Weight of the device with antennas 4.o kg (8.8 lb.) Weight of the device with antennas 4.4 kg (9.7 lb.) and wall mount Power Specifications Table 6. AT-TQ5403e Maximum Power Consumption AT-TQ5403e 15.8 watts...

  • Page 46: Environmental Specifications

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Environmental Specifications Table 7. Environmental Specifications Operating Temperature of the -40° C to 65° C (-40° F to 149° F) Access Point Storage Temperature -40° C to 80° C (-40° F to 176° F)

  • Page 47: Lan Port

    Draft 5 on February 14, 2019 Appendix A: Technical Specifications and Statements LAN Port Table 10. LAN Port Specifications Connector RJ45 Standards IEEE 802.3 (10Base-T) IEEE 802.3u (100Base-TX) IEEE 802.3ab (1000Base-T) PoE standard IEEE 802.3at (class 4) Figure 21 illustrates the pin layout of the LAN port. Figure 21.
  • Page 48 Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Table 12 lists the pin signals for the MDI-X configuration at 10 or 100 Mbps. Table 12. MDI-X Pin Signals (10Base-T or 100Base-TX) Signal Table 13 lists the pin signals when the LAN port is operating at 1000 Mbps.

  • Page 49: Safety And Electromagnetic Emissions Certifications

    Draft 5 on February 14, 2019 Appendix A: Technical Specifications and Statements Safety and Electromagnetic Emissions Certifications Table 14. Safety and Electromagnetic Emissions Certificates Standard RoHs compliant Compliance European Union RoHS (Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.)

  • Page 50: Operation Frequency Information

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Operation Frequency Information Table 15. Operation Frequency 2.4GHz 5150~5250GHz 5250~5350GHz 5470~5725GHz 5725~5850GHz Indoor Outdoor Indoor Outdoor Indoor Outdoor Indoor Outdoor Indoor Outdoor √ √ √ √ √...

  • Page 51: Ic Statements

    Draft 5 on February 14, 2019 Appendix A: Technical Specifications and Statements IC Statements This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

  • Page 52: Avertissement

    Draft 5 on February 14, 2019 AT-TQ5403e Outdoor Wireless Access Point Installation Guide Avertissement Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment: (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à...

  • Page 53: Europe - Eu Declaration Of Conformity

    Draft 5 on February 14, 2019 Appendix A: Technical Specifications and Statements Europe - EU Declaration of Conformity Hereby, Allied Telesis declares that the radio equipment type [AT-TQ5403e] is in compliance with Directive 2014/53/EU. Operating The operating frequencies and maximum transmission power levels for...

Table of Contents