Ceiling T-Rail Installation - Allied Telesis AT-MWS600AP Installation Manual

Chapter 3: Installing the AT-MWS600AP or AT-MWS1750AP Access Point
Ceiling T-Rail
Installation
50
12. Insert the two screws on the access point to the holes on the mounting
base, as shown in Figure 25.
Figure 25. Installing the Access Point onto a Ceiling or Wall
13. Turn the access point until it is securely seated. See Figure 26.
Figure 26. Turning the Access Point to Secure to the Mounting Base
To install the access point on the ceiling T-rail, perform the following
procedure:
What to Prepare for the Rail Installation
You need the following items to install the access point on a ceiling or wall:
AT-MWS600AP or AT-MWS1750AP access point

Two rail clips, either narrow rail clips or wide rail clips

Two spacers

Two long screws for the rail clip with the spacer

Phillips-head screwdriver
