Connecting The Access Point With The Ethernet Cable - Allied Telesis AT-MWS600AP Installation Manual
Mws series simultaneous dual band wireless access point
Hide thumbs
Also See for AT-MWS600AP:
- Reference manual (50 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
MWS Series Access Point Installation Guide
Connecting the Access Point with the Ethernet Cable
To connect the access point with the Ethernet cable, perform the following
procedure:
1. Connect the RJ-45 plug into the LAN port as shown in Figure 29.
Figure 29. Connecting the LAN Cable
2. Connect the other RJ-45 plug to the PoE+ switch.
53
Advertisement
Table of Contents
