Table of Contents
Advertisement
Unpacking the Shipping Box
To verify the contents of the shipping box, perform the following
procedure:
1. Remove all components from the shipping box.
Note
Store the packaging material in a safe location. Please use the
original shipping material if you need to return the device to Allied
Telesis.
2. Verify the contents of the shipping box listed in Table 11. If any item is
missing or damaged, contact your Allied Telesis sales representative
for assistance.
Figure 11. Shipping Box Components
Name
TQ6000 GEN2 Access Point
One Mounting Bracket
Two M5 x 4.5 mm, Pan-head
Screws
TQ6000 GEN2 Access Points Installation Guide
Component
39
Advertisement
Table of Contents
