Ac Adapter For External Power Supply - Allied Telesis AT-TQ6602 GEN2 Installation Manual

AC Adapter for External Power Supply

The access point can be powered in two ways:
PoE+ Sourcing Equipment (PSE) on LAN1 and/or LAN2 ports

AC power adapter

You can also power it with both methods for power redundancy. The
power sources are not load-sharing. A wireless access point that has both
power sources uses the AC power adapter as its primary power source
and PoE+ as redundant power.
For technical specifications, refer to "Power Specifications" on page 56.
The PWRADP-01 (DA-48Z12) Power Adapter, shown in Figure 9, from
Allied Telesis is approved for this product.
Figure 9. PWRADP-01 (DA-48Z12) Power Adapter
TQ6602 GEN2 Access Points Installation Guide
27