Checking The Configuration; Maintaining An Acl; Clearing Statistics About An Acl; Clearing Statistics About A Blacklist Or A Whitelist - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
After the whitelist is configured, the packets matching the rules defined in the whitelist are sent
first after reaching the S9300. The packets are not affected by the blacklist.
----End

8.4.4 Checking the Configuration

Procedure
l
l
----End

8.5 Maintaining an ACL

This section describes how to maintain an ACL.

8.5.1 Clearing Statistics About an ACL

8.5.2 Clearing Statistics about a Blacklist or a Whitelist

8.5.3 Monitoring the Running Status of an ACL
8.5.1 Clearing Statistics About an ACL
Context
Statistics cannot be restored after you clear them. So, confirm the action before you use the
command.
Procedure
l
----End
8.5.2 Clearing Statistics about a Blacklist or a Whitelist
Issue 01 (2009-07-28)
Run the display blacklist [ slot slot-id ] command to view the configuration of the blacklist,
including the ACL, slot IDs of the LPUs where the blacklist is applied, and statistics about
each rule.
Run the display whitelist [ slot slot-id ] command to view the configuration of the whitelist,
including the ACL, slot IDs of the LPUs where the whitelist is applied, and statistics about
each rule.
CAUTION
Run the reset acl counter { acl-number | all } command in the user view to clear counters
of ACL rules.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 ACL Configuration
8-11