Start And Stop Presentation - Cisco TelePresence CE9.12 User Manual

Content Sharing

Start and Stop Presentation

1
Make sure your presentation source is connected and On. You
may need to select Share and press OK on the remote control.
3
The size of the shared image is controlled by means of the
Minimize/Maximize icon. Select this and press OK on the
remote control, if needed.
D15097.22 Cisco TelePresence SX10, SX20 User Guide APRIL 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Share in call
You may now select Local preview to inspect the contents
without sharing it with the others, before you select Share in
call to share it with the others.
4
Stop sharing
To stop sharing content, select Stop sharing and press OK on the
remote control.
About Content Sharing
Use this feature to share content
on your PC in a call or outside a
call. The procedure is the same, but
shown here is the in-call way only.
To share content using Proximity,
make sure your presentation source
has Cisco Proximity installed and
activated. Allow some time for the
pairing to take place. Follow on-
screen instructions.
24