Parameter Lists; Parameter Options; Default Settings - Danfoss VLT HVAC Basic Drive FC 101 Programming Manual

Parameter Lists

5 Parameter Lists

5.1 Parameter Options

5.1.1 Default Settings

Changes during operation
"TRUE" means that the parameter can be changed while the frequency converter is in operation and "FALSE" means that
the frequency converter must be stopped before a change can be made.
2-Set-up
'All set-up': the parameter can be set individually in each of the 2 set-ups, i.e. one single parameter can have 2 different
data values.
'1 set-up': data value is the same in all set-ups.
ExpressionLimit
Size related
N/A
No default value available.
Conversion index
This number refers to a conversion figure used when writing or reading by means of a frequency converter.
Conv. 100 75 74 70
index
Conv. 1 3600000 3600 60
factor
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 boolean variables
Table 5.1 Data Type
®
VLT HVAC Basic Drive FC 101 Programming Guide
67 6 5 4
1/60 1000000 100000 10000 1000
MG18B302 - Rev. 2013-09-02
3 2 1 0 -1 -2
100 10 1 0.1 0.01
-3 -4 -5 -6
0.001 0.0001 0.00001 0.000001
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
87
5 5