Danfoss VLT HVAC Basic Drive FC 101 Programming Manual page 69

Parameters
14-51 DC-Link Voltage Compensation
Option: Function:
[0] Off Disables DC Link Compensation.
[1] On Enables DC Link Compensation.
*
14-52 Fan Control
Option: Function:
Only valid for the following frequency
converters: 380-480 V, 30-90 kW.
[0] Auto
*
[4] Auto Low Temp
Env.
14-53 Fan Monitor
Option: Function:
Select which reaction the frequency converter
should take in case a fan fault is detected. (Only
valid for some frequency converter sizes.)
[0] Disabled
[1] Warning
*
[2] Trip
14-55 Output Filter
Option:
[0] No Filter
*
[1] Sine-Wave Filter
[3] Sine-Wave Filter with
Feedback
14-63 Min Switch Frequency
Set the minimum switch frequency allowed by the output filter.
Option:
[2] 2.0 kHz
*
[3] 3.0 kHz
[4] 4.0 kHz
[5] 5.0 kHz
[6] 6.0 kHz
[7] 8.0 kHz
[8] 10.0 kHz
[9] 12.0kHz
[10] 16.0kHz
®
VLT HVAC Basic Drive FC 101 Programming Guide
Function:
Select whether an output
filter is present.
Function:
MG18B302 - Rev. 2013-09-02
3 3
67