POS Channel Configuration Example
Command
Step 3
Router(config-if)# end
Step 4
Router# copy running-config startup-config
POS Channel Configuration Example
Figure 10-2
Example 10-3
Figure 10-2
POS Channel Example
port-channel 1
bridge-group 1
bridge-group 1
bridge-group 1
Example 10-3 Switch A Configuration
bridge irb
bridge 1 protocol ieee
!
!
interface Port-channel1
no ip address
no keepalive
bridge-group 1
!
interface FastEthernet0
no ip address
bridge-group 1
!
interface POS0
no ip address
channel-group 1
crc 32
pos flag c2 1
!
interface POS1
no ip address
channel-group 1
crc 32
pos flag c2 1
Example 10-4 Switch B Configuration
bridge irb
bridge 1 protocol ieee
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
10-6
shows an example of POS channel configuration. The associated code is provided in
(Switch A) and
Example 10-4
pos 0
SONET STS-N
pos 1
Purpose
Exits to privileged EXEC mode.
(Optional) Saves the configuration changes to
NVRAM.
(Switch B).
pos 0
port-channel 1
bridge-group 1
bridge-group 1
pos 1
bridge-group 1
Chapter 10 Configuring Link Aggregation