Cisco ONS 15454 SDH Configuration Manual page 225

Chapter 14 Configuring Quality of Service
"Match cos 0" should not be included in the definition of any class-map, because non-VLAN-tagged
Caution
Ethernet packets are always treated as CoS 0 on input from Ethernet. Using "match cos 0" might
incorrectly match all traffic coming from Ethernet.
Example 14-1 Class and Policy-map Definition Configuration Overcoming the DSCP Limitation
class-map match-any Bulk-Data
match ip dscp af11
match cos 3
class-map match-any Crit-Data
match ip dscp af21
match cos 7
class-map match-any Net-Management
match ip dscp cs2
match cos 2
class-map match-any Video
match ip dscp cs4
match cos 4
class-map match-any Voice
description
match ip dscp ef
match ip dscp cs3
match cos 5
class-map match-any Routing
match ip dscp cs6
match cos 6
class-map match-any Scavenger
match ip dscp cs1
match cos 1
policy-map MAN-QoS-DSCP
class Voice
class Bulk-Data
bandwidth percent 20
set cos 3
class Crit-Data
bandwidth percent 20
set cos 7
class Net-Management
bandwidth percent 2
set cos 2
class Video
bandwidth percent 5
set cos 4
class Routing
bandwidth percent 2
set cos 6
class Scavenger
bandwidth percent 1
set cos 1
class class-default
bandwidth percent 45
set cos 0
af31
af41
Includes Voice and Call Signalling
priority percent 4
set cos 5
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
QoS on Cisco Proprietary RPR
14-11