Cisco ONS 15454 SDH Configuration Manual page 149

Chapter 9 Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling
Table 9-3
Command
show dot1q-tunnel
show dot1q-tunnel interface interface-id
show l2protocol-tunnel
show vlan dot1q tag native
Commands for Monitoring and Maintaining Tunneling
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Monitoring and Verifying Tunneling Status
Purpose
Displays IEEE 802.1Q tunnel ports on the switch.
Verifies if a specific interface is a tunnel port.
Displays information about Layer 2 protocol
tunneling ports.
Displays IEEE 802.1Q tunnel information.
9-13