Cisco ONS 15454 SDH Configuration Manual page 528

show ons alarm defect pos interface-number
show ons alarm defect pos interface-number
Use this command to display the link-layer defects.
Syntax Description Parameter
interface-number
Defaults
N/A
Command Modes Privileged exec
Usage Guidelines This command displays the set of active defects for the POS layer and the possible set of defects that can
be set.
Examples
router# show ons alarm defect pos 0
POS0
Active Defects: None
Alarms reportable to TCC/CLI: PAIS PRDI PLOP PUNEQ PPLM PTIM PPDI BER_SF_B3 BER_SD_B3
Related Commands show controller pos
show ons alarm failure
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
A-52
Description
Number of the interface (0–1)
Appendix A Command Reference