Cisco ONS 15454 SDH Configuration Manual page 526

show ons alarm defect eqpt
show ons alarm defect eqpt
Use this command to display the equipment-layer defects.
Syntax Description This command has no arguments or keywords.
Defaults
N/A
Command Modes
Privileged exec
Usage Guidelines This command displays the set of active defects for the equipment layer and the possible set of defects
that can be set.
Examples
router# show ons alarm defect eqpt
Equipment Defects
Active: CONTBUS-IO-B
Reportable to TCC/CLI: CONTBUS-IO-A CONTBUS-IO-B CTNEQPT-PBWORK CTNEQPT-PBPROT EQPT
RUNCFG-SAVENEED ERROR-CONFIG
Related Commands show ons alarm failure
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
A-50
Appendix A Command Reference