Cisco ONS 15454 SDH Configuration Manual page 551

Appendix A Command Reference
Weight:
Secondary Mac Addresses:
=======================================================================
Topology Map for Outer ringlet
=======================================================================
=======================================================================
Topology entry at Index 1 on ringlet 0:
Station MAC address: 000b.fcff.9d34
Valid on ringlet0: YES
Entry reachable: YES
Advertised Protection requests:
Active Edges:
Preferred protection mode: STEERING
Jumbo preference: NOT SET (ring doesn't supports JUMBOS)
Measured LRTT: 0
Sequence Number: 3
ATD INFO:
Station Name: ML100X-491
A0 reserved Bandwidth:
SAS enabled: YES
Weight:
Secondary Mac Addresses:
=======================================================================
Topology entry at Index 2 on ringlet 0:
Station MAC address: 0011.2130.b568
Valid on ringlet0: YES
Entry reachable: YES
Advertised Protection requests:
Active Edges:
Preferred protection mode: STEERING
Jumbo preference: NOT SET (ring doesn't supports JUMBOS)
Measured LRTT: 0
Sequence Number: 3
ATD INFO:
Station Name: ML1000-491
A0 reserved Bandwidth:
SAS enabled: YES
Weight:
Secondary Mac Addresses:
=======================================================================
Topology entry at Index 3 on ringlet 0:
Station MAC address: 0005.9a39.7630
Valid on ringlet0: YES
Entry reachable: YES
Advertised Protection requests:
ringlet0: 1ringlet1: 1
MAC 1: 0000.0000.0000 (UNUSED)
MAC 2: 0000.0000.0000 (UNUSED)
ringlet0: IDLEringlet1: IDLE
ringlet0: NO ringlet1: NO
ringlet0: 0 mbpsringlet1: 0 mbps
ringlet0: 1ringlet1: 1
MAC 1: 0000.0000.0000 (UNUSED)
MAC 2: 0000.0000.0000 (UNUSED)
ringlet0: IDLEringlet1: IDLE
ringlet0: NO ringlet1: NO
ringlet0: 0 mbpsringlet1: 0 mbps
ringlet0: 1ringlet1: 1
MAC 1: 0000.0000.0000 (UNUSED)
MAC 2: 0000.0000.0000 (UNUSED)
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
show rpr-ieee topology detail
A-75