Cisco ONS 15454 SDH Configuration Manual page 529

Appendix A Command Reference
show ons alarm defect rpr [interface-number]
Use this command to display the interface defects on the layer.
Syntax Description Parameter
interface-number
Defaults
N/A
Command Modes Privileged exec
Usage Guidelines This command displays the set of active defects for the IEEE 802.17b based RPR and the possible set of
defects that can be set.
Examples
router# show ons alarm defect rpr
RPR-IEEE0
Active: None
Reportable to SC: RPR-PASSTHRU RPR-PROT_ACTIVE RPR-MAX_STATION RPR-MIS_CONF
RPR-RINGLET0_A0_EXCEED_BANDWIDTH RPR-RINGLET1_A0_EXCEED_BANDWIDTH RPR-RI_PEER_MISSING
RPR-RI_FAULT
Related Commands
show ons alarm
Description
Number of the interface (0–1)
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
show ons alarm defect rpr [interface-number]
A-53