Ce-100T-8 Pools - Cisco ONS 15454 SDH Configuration Manual

Chapter 24 CE-100T-8 Ethernet Operation
Table 24-12
Service
Combination
19
20
21
22
2

CE-100T-8 Pools

The CE-100T-8 total circuit capacity is divided among four pools. Each pool has a maximum capacity
of three STS-1s with SONET or three VC-3s with SDH.
Displaying CE-100T-8 Pool Information with the STS/VT Allocation or VC4/VC LO Allocation Tab
At the CTC card-level view under the Maintenance tab, the STS/VT Allocation tab on the
ONS 15454 SONET and the VC4/VC LO Allocation tab on the ONS 15454 SDH display how the
provisioned circuits populate the four pools. On both screens, the POS Port table has a row for each port
with three columns. They show the port number, the circuit size and type, and the pool it is drawn from.
The Pool Utilization table has four columns and shows the pool number, the type of circuits in that pool,
how much of the pool's capacity is being used, and whether additional capacity is available.
Figure 24-4
CE-100T-8 Sample Service Densities for SDH (continued)
VC-4 or
VC-3-3v
0
0
0
0
These service combinations require creating the VC-12-xv circuit before you create the VC-3 circuits.
displays an SDH version of the tab, and
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
VC-3-2v VC-3
3 3
0 8
0 4
0 0
Figure 24-5
CE-100T-8 Pools
Number of Active
VC-12-xv Service
1 (x=1–32) 8
plus
1 (x=1–31)
0 8
2 (x=1–32) 8
plus
2 (x=1–31)
4 (x=1–32) 8
plus
4 (x=1–31)
displays the SONET version of the tab.
24-11