Chapter 24 Ce-100T-8 Ethernet Operation; Ce-100T-8 Overview; Figure 24-1 Ce-100T-8 Point-To-Point Circuit - Cisco ONS 15454 SDH Configuration Manual

CE-100T-8 Ethernet Operation
This chapter describes the operation of the CE-100T-8 (Carrier Ethernet) card supported on the
ONS 15454 and ONS 15454 SDH. A CE-100T-8 card installed in an ONS 15454 SONET is restricted to
SONET operation, and a CE-100T-8 card installed in an ONS 15454 SDH is restricted to SDH operation.
Another version of the CE-100T-8 card is supported on the ONS 15310-CL.
Provisioning is done through Cisco Transport Controller (CTC) or Transaction Language One (TL1).
Cisco IOS is not supported on the CE-100T-8 card.
For Ethernet card specifications, refer to the Cisco ONS 15454 Reference Manual or the
Cisco ONS 15454 SDH Reference Manual. For step-by-step Ethernet card circuit configuration
procedures, refer to the Cisco ONS 15454 Procedure Guide or the Cisco ONS 15454 SDH Procedure
Guide. For TL1 provisioning commands, refer to the Cisco ONS SONET TL1 Command Guide or the
Cisco ONS 15454 SDH and Cisco ONS 15600 SDH TL1 Command Guide.
Chapter topics include:
•
•
•

CE-100T-8 Overview

The CE-100T-8 is a Layer 1 mapper card with eight 10/100 Ethernet ports. It maps each port to a unique
SONET/SDH circuit in a point-to-point configuration.
application. In this example, data traffic from the Fast Ethernet port of a switch travels across the
point-to-point circuit to the Fast Ethernet port of another switch.
Figure 24-1 CE-100T-8 Point-to-Point Circuit
The CE-100T-8 cards allow you to provision and manage an Ethernet private line service like a
traditional SONET/SDH line. CE-100T-8 card applications include providing carrier-grade Ethernet
private line services and high-availability transport.
CE-100T-8 Overview, page 24-1
CE-100T-8 Ethernet Features, page 24-2
CE-100T-8 SONET/SDH Circuits and Features, page 24-7
ONS Node
Ethernet
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
C H A P T E R
Figure 24-1
ONS Node
Point-to-Point Circuit
24
illustrates a sample CE-100T-8
Ethernet
24-1