Figure 8-2 Bridging Ieee 802.1Q Vlans - Cisco ONS 15454 SDH Configuration Manual

IEEE 802.1Q VLAN Configuration
Figure 8-2 Bridging IEEE 802.1Q VLANs
802.1.Q
Fast Ethernet 0.4
VLAN 4
Host station
VLAN 3
Host station
Example 8-1
configuration for both router A and router B. The example is shown in
Example 8-1
bridge 1 protocol ieee
bridge 2 protocol ieee
bridge 3 protocol ieee
bridge 4 protocol ieee
!
!
interface FastEthernet0
no ip address
!
interface FastEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
!
interface FastEthernet0.2
encapsulation dot1Q 2
bridge-group 2
!
interface FastEthernet0.3
encapsulation dot1Q 3
bridge-group 3
!
interface FastEthernet0.4
encapsulation dot1Q 4
bridge-group 4
!
interface POS0
no ip address
crc 32
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
8-4
POS 0
Native VLAN 1
Fast Ethernet 0.1
Fast Ethernet 0.2
Switch
VLAN 2
Host station
Fast Ethernet 0.3
shows how to configure VLANs for IEEE 802.1Q VLAN encapsulation. Use this
Configure VLANs for IEEE 802.1Q VLAN Encapsulation
POS 0
SONET/SDH
Fast Ethernet 0.4
VLAN 4
Host station
Chapter 8 Configuring VLANs
Native VLAN 1
802.1.Q
Fast Ethernet 0.1
Fast Ethernet 0.2
Switch
VLAN 2
Fast Ethernet 0.3
VLAN 3
Host station
Figure 8-2:
Host station